隔離墩模具材料決定模具的質量，在選材的時候需要精益求精的態度，例如使用碳化物不

均勻性5 - 6 Cr12MoV鋼拉伸模量,使用壽命通常是不到1萬件,并使銅合金模具材料的拉伸

模量,使用壽命可達70000件或更多,這是因為銅合金模具材料的熱導率是好的,可以確保制

服高速鋼模具溫度分布在工作,不會讓模具與當地高溫裂縫,不會讓拉伸產品表面出現冷焊

接脫馬克和起皺,縮短成型時間,提高模具壽命,提高生產效率和產品質量。隔離墩模具的發

展趨勢是公司或制造商,但我們仍沒有足夠的表面信息,現在我們要做的就是關注信息化建

設,實現信息化的基礎上完善專業化的工作、提高生產效率。長壽命和多功能方向發展是必

然趨勢。
The quality of the die is determined by the material used in the isolation 

block, and an attitude of perfection is needed in the selection of the 

material, for example, the tensile Modulus of steel 5-6cr12mov with carbide 

inhomogeneity is used, and the service life is usually less than 10,000 pieces, 

and make the copper alloy die material’s tensile Modulus, service life can 

reach 70000 pieces or more, this is because the copper alloy die material’s 

thermal conductivity is good, can ensure the uniform high speed steel die 

temperature distribution in the work, do not let the mold and local high 

temperature cracks, do not let the surface of tensile products cold welding 

mark and wrinkle, shorten the forming time, improve mold life, improve 

production efficiency and product quality. The trend of the isolator mold is 

the company or the manufacturer, but we still do not have enough surface 

information, now we have to do is to pay attention to the information 

construction, on the basis of the realization of information, improve the work 

of specialization, improve production efficiency. Long Life and multi-

functional direction of development is an inevitable trend.
 
 
目前市場中存在隔離墩模具這種類型的模具由相變強化效果不好,齒輪或模具損壞或有缺陷

的零件的激光熔覆工藝包層特定的合金材料,使與賤金屬材料形成良好冶金結合,不僅裝備

或者修理模具的修復過程形態、和改善維修配件的性能,是一種增強修復,現在已經用于齒

輪和鋼模具激光表面熔覆修復被稱為齒輪或模具制造技術。在路中間的隔離墩模具兩邊經

常使用,保護防撞的效果,模具采用優質鋼板經切割、焊接而成,可以根據客戶需求定制規格

,來縮小口模形狀的頂部寬,分為各種規格1 - 2米的長度,壓鑄模預制隔離墩和現澆模,經常

使用預制隔離墩模具,鋼模具使用更方便,可以在任何地方生產，現澆模只能用于建筑工地,

這個模具是簡單的,沒有底,兩側是好的,只與模具工廠設備生產車間,專業的技術為您創造

更多優質的產品。

At present, there are some special alloy materials in the laser cladding 

process for the isolation block die, which is made by the laser cladding 

process for the parts with bad phase transformation strengthening effect, gear 

or die damage or defect, to form a good metallurgical bond with base metal 

materials, not only to equip or repair the mold repair process shape, and 

improve the performance of maintenance parts, is a kind of enhanced repair, 

laser surface cladding is now used to repair gears and steel dies known as gear 

or die making techniques. It is often used on both sides of the isolator die in 

the middle of the road to protect the effect of anti-collision. The die is made 

of high-quality steel plate which is cut and welded. It can be customized 

according to customer requirements to reduce the top width of the die shape, 

divided into a variety of specifications 1-2 meters in length, die casting mold 

precast isolation pier and cast-in-place mold, often use precast isolation pier 

mold, steel mold is more convenient to use, can be produced anywhere, cast-in-

place mold can only be used for construction sites, this mold is simple, no 

bottom, the two sides are good, only with the mold factory equipment production 

workshop, professional technology to create more quality products for you.